Three-dimensional Printing of Silver Microarchitectures Using Newtonian Nanoparticle Inks-Reference-Cited by-同舟云学术

Three-dimensional Printing of Silver Microarchitectures Using Newtonian Nanoparticle Inks

Published:2017-05-25 Issue:22 Volume:9 Page:18918-18924
ISSN:1944-8244
Container-title:ACS Applied Materials & Interfaces
language:en
Short-container-title:ACS Appl. Mater. Interfaces

Author:

Lee Sanghyeon¹²,Kim Jung Hyun¹,Wajahat Muhammad¹³,Jeong Hwakyung¹,Chang Won Suk¹²,Cho Sung Ho²,Kim Ji Tae⁴,Seol Seung Kwon¹³^ORCID

Affiliation:

1. Nano Hybrid Technology Research Center, Korea Electrotechnology Research Institute (KERI), Changwon-si, Gyeongsangnam-do 51543, Republic of Korea

2. Department of Electronics and Computer Engineering, Hanyang University, Seoul 04763, Republic of Korea

3. Electrical Functional Material Engineering, Korea University of Science and Technology (UST), Changwon-si, Gyeongsangnam-do 51543, Republic of Korea

4. Department of Mechanical Engineering, The University of Hong Kong, Pokfulam Road, Hong Kong, China

Funder

University of Hong Kong

Ministry of Science, ICT and Future Planning

Publisher

American Chemical Society (ACS)

Subject

General Materials Science

Link

https://pubs.acs.org/doi/pdf/10.1021/acsami.7b02581

Reference56 articles.

1. Progress Towards the First Wireless Sensor Networks Consisting of Inkjet-Printed, Paper-Based RFID-Enabled Sensor Tags

2. A flexible high potential printed battery for powering printed electronics

3. A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors

4. Printed electronics: the challenges involved in printing devices, interconnects, and contacts based on inorganic materials

Cited by 49 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Conformal and rapid micro-molding manufacturing of ultraviolet-curable silver paste on curved surfaces using digital light processing;Journal of Materials Science & Technology;2025-04

2. Engineering the Interface of Cu-hBN Immiscible System Using 3D Printing To Enhance Mechanical and Thermal Properties;ACS Applied Engineering Materials;2024-04-01

3. Applications of 3D printing in tumor treatment;Biomedical Technology;2024-03

4. 3-D/4-D-Printed Reconfigurable Metasurfaces for Controlling Electromagnetic Waves;Proceedings of the IEEE;2024

5. In-process sintering of Au nanoparticles deposited in laser-assisted electrophoretic deposition;Optics Express;2023-11-28