Corrosion Mechanisms and Materials Selection for the Construction of Flue Gas Component in Advanced Heat and Power Systems-Reference-Cited by-同舟云学术

Corrosion Mechanisms and Materials Selection for the Construction of Flue Gas Component in Advanced Heat and Power Systems

Published:2017-11-20 Issue:48 Volume:56 Page:14141-14154
ISSN:0888-5885
Container-title:Industrial & Engineering Chemistry Research
language:en
Short-container-title:Ind. Eng. Chem. Res.

Author:

Zeng Yimin¹^ORCID,Li Kaiyang²,Hughes Robin³,Luo Jing-Li²^ORCID

Affiliation:

1. Natural Resources Canada, CanmetMATERIALS, Hamilton, Ontario L8P 0A5, Canada

2. Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta T6G 1H9, Canada

3. Natural Resources Canada, CanmetENERGY, Ottawa, Ontario K1A 1M1, Canada

Funder

Natural Sciences and Engineering Research Council of Canada

Natural Resources Canada

Publisher

American Chemical Society (ACS)

Subject

Industrial and Manufacturing Engineering,General Chemical Engineering,General Chemistry

Link

https://pubs.acs.org/doi/pdf/10.1021/acs.iecr.7b03664

Reference137 articles.

1. Separation of CO2 from Flue Gas: A Review

2. Snis, M.; Beckers, B.; Bergquist, A.; Torsner, E.,Modern materials in flue gas cleaning applications: corrosion properties in artificial scrubber environment, field tests and service experience. InCORROSION 2007, Nashville, Tennessee, March 11–15, 2007;NACE International:Houston, TX, 2007.

3. Agarwal, D. C.; Ford, M.,FGD metals and design technology: past problems/solution, present status and future outlook. InCORROSION 98, San Diego, California, March 22–27, 1998;NACE International:Houston, TX, 1998.

4. Oxy-fuel combustion for power generation and carbon dioxide (CO₂) capture

5. Development and application of high-temperature corrosion-resistant materials and coatings for advanced waste-to-energy plants

Cited by 30 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Erosion and intergranular corrosion induced failure of S31254 stainless steel – Case study on Venturi scrubber in a natural gas purification plant;Journal of Loss Prevention in the Process Industries;2024-10

2. Microstructure, mechanical and electrochemical behavior of magnetron-sputtered carbothermic reduced iron-boride ceramic coatings;Ceramics International;2024-10

3. Microstructure and Properties Characteristics of Ni–25Cr–10Fe–xSi (x = 1, 2, 3, 4) Alloys for Waste Incineration Equipment;Metallurgical and Materials Transactions A;2024-04-24

4. Comparing Electrochemical Passivation and Surface Film Chemistry of 654SMO Stainless Steel and C276 Alloy in Simulated Flue Gas Desulfurization Condensates;Materials;2024-04-16

5. Corrosion behavior of Ni–25Cr–10Fe–3Si–xMo alloys beneath KCl–ZnCl₂ deposits at 650°C: Role of long‐term aging;Materials and Corrosion;2024-03-25