Affiliation:
1. School of Engineering, University of Liverpool, Liverpool L69 3GH, UK
2. Key Laboratory for Biomechanics and Mechanobiology of the Ministry of Education, School of Biological Science and Medical Engineering, Beihang University, People's Republic of China
3. Beijing Advanced Innovation Centre for Biomedical Engineering, Beihang University, Beijing 100083, People's Republic of China
4. NIHR Biomedical Research Centre for Ophthalmology, Moorfields Eye Hospital NHS Foundation Trust and UCL Institute of Ophthalmology, London, UK
Abstract
This study aims to estimate the material properties of the porcine vitreous while
testing it in close to its natural physiological conditions. Eighteen porcine
eyes were tested within 48 h post-mortem. A custom-built computer-controlled
test rig was designed to support, load and monitor the behaviour of eye globes
while being subjected to dynamic rotation cycles mimicking saccade eye movement.
Specimens were glued to the base of a container, surrounded by gelatin, frozen
and cut in half to expose the vitreous. After thawing, the container was
subjected to concentric dynamic rotations of up to 5°, 10° or
15°, while taking 50 MP photos of the specimen every 2 ms. The images
were analysed by a digital image correlation algorithm to trace the movement of
marked points on the vitreous surface with different radii from the centre of
the posterior chamber. The initial camera image was used in building a
finite-element model of the test set-up, which was used in an inverse analysis
exercise to estimate the material properties of the vitreous. Angular
displacements of the monitored points were up to 3.3°, 4.1° and
3.9° in response to eye rotations of 5°, 10° and
15°, respectively. With the experimental relationships between eye
rotation and angular displacements used as target behaviour, the inverse
analysis exercise estimated the initial shear modulus, the long-term shear
modulus and the viscoelastic decay constant of the porcine vitreous as 2.10
± 0.15 Pa, 0.50 ± 0.04 Pa and 1.20 ± 0.09
s
−1
, respectively. Consideration of the viscoelasticity of
the vitreous was essential to represent its experimental behaviour. Testing the
vitreous in close to its normal physiological conditions produced estimations of
the initial shear modulus and long-term shear modulus that were, respectively,
smaller and larger than reported values (Zimberlin
et al
. 2010
Soft Matter
6, 3632–3635. (
doi:10.1039/b925407b
), Liu
et al
. 2013
J. Biomech.
46, 1321–7. (
doi:10.1016/j.jbiomech.2013.02.006)
, Rossi
et
al
. 2011
Invest. Ophthalmol. Vis. Sci.
52,
3994–4002. (
doi:10.1167/iovs.10-6477
)).
Funder
National Natural Science Foundation of China
Key R & D Program of China
Subject
Biomedical Engineering,Biochemistry,Biomaterials,Bioengineering,Biophysics,Biotechnology
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献