Affiliation:
1. JSC «Academician M. F. Reshetnev» Information Satellite Systems»
Abstract
The article discusses the process of using additive technologies in the manufacture of formbuilding equipment. It is supposed to reduce the manufacturing time and labor costs of workers by using non-traditional technological systems in the manufacture of the form-building equipment’s model, which has qualitatively new properties and capabilities and also significantly increases the level of automation and intensification of production processes. When designing a technological process high information and computerization, a certain level of electrification and energy supply are required, therefore, the design of new technologies is based on rational technological processes, using accumulated experience, and a new system approach developed on the basis of the unity of production design technology using CAD/CAE/CAM systems. The extrusion method of three-dimensional printing using the FDM technology with the use of a new modified material of the PA12CF brand was adopted as the basis for the production of form-building equipment. This material is a polyamide-12 composite plastic reinforced with carbon fibers. The use of additive technologies using modern computer modeling based on the unity of technological systems is an urgent task. These technological systems will significantly increase productivity, reduce the production area occupied by equipment, reduce the duration of the production cycle, reduce the number of workers employed in production, and make it possible to switch to technologies that do not require paper-based design documentation. At the same time, additive technologies are open to their further development and have great potential to evolve and be modified in accordance with the changing external conditions on the labor market.
Publisher
TP National Information Satellite System
Reference15 articles.
1. Zlenko М. А., Popovich A. A., Mutylin I. N. Additivnye tekhnologii v mashinostroenii [Additive technologies in mechanical engineering]. 2013, pp. 4–35. (In Russian)
2. Smirnov V. V., Barzali V. V., Ladnov P. V. Perspektivy razvitiya additivnogo proizvodstva v rossijskoj promyshlennosti [Prospects for the development of additive manufacturing in the Russian industry] // Experience of FGBOU USATU. Materials science news. Science and technology, 2015, no. 2 (14), pp. 23–27. (In Russian)
3. Kuryntsev S. V., Nagulin K. Yu., Gorunov A. I. Additivnye tekhnologii tret'ya industrial'naya revolyuciya [Additive technologies third industrial revolution] // Science intensive technologies in mechanical engineering, 2016, pp. 39–44. (In Russian)
4. Kuryntsev S. V. The influence of pre-heat treatment on laser welding of T-joints of workpieces made of selective laser melting steel and cold rolled stainless steel // Optics & Laser Technology, 2018, pp. 59–66.
5. Zotov O. Yu., Frolov D. A. Osobennosti metoda izgotovleniya izdelij putem poslojnogo naplavleniya materiala [Features of the method of manufacturing products by layer-by-layer deposition of the material] // Scientist of the XXI century, 2016, no. 1 (14), pp. 7–11. (In Russian)
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献