Affiliation:
1. Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte, Brazil
2. Instituto Federal de Educação, Ciência e Tecnologia de Alagoas, Brazil
3. Universidade Federal de Campina Grande, Brazil
Abstract
ABSTRACT The objective of this work was to characterize the physical and physicochemical parameters of pequi powders obtained by means of convective drying at different temperatures (50, 60, 70 and 80 °C) and pulp layer thicknesses (0.5, 1.0 and 1.5 cm). Initially, the physicochemical characterization of fresh pulp was carried out, followed by convective drying under the conditions mentioned, until the equilibrium moisture content and subsequent disintegration to obtain the powders. Subsequently, the physical and physicochemical properties of the obtained powders were analyzed and the best powder was selected based on reduced moisture content and water activity and lower peroxide index. Pequi pulp showed a high fat content and a yellowish color; with the increase in drying temperature, there were reductions in the moisture content, water activity and protein content of the powders. As for the color parameters, the powder showed a darkening with the increase in drying time; the water adsorption isotherms of the selected pequi powder were classified as Type II, and the GAB model showed the best fits. The pequi powders showed good solubility and low cohesiveness. The powder that showed good flowability was produced at a drying temperature of 60 °C and with pequi pulp layer thickness of 0.5 cm.
Subject
General Agricultural and Biological Sciences
Reference41 articles.
1. Physical and thermal properties of baobab fruit pulp powder;ADEKUNLE A. A.;International Journal of Engineering Research and Applications,2013
2. Boas práticas na fabricação da pasta de pequi;BARROS M. E. S.,2013
3. Co-crystallization of Honey with Sucrose;BHANDARI B. R.;LWT - Food Science and Technology,1998
4. Effect of carrier agents on physical and microstructural properties of spray dried tamarind pulp powder;BHUSARI S. N.;Powder Technology,2014
5. Sorption isotherms in materials of biological origin mathematical and physical approach;BLAHOVEC J;Journal of Food Engineering,2004