Geometric design, modelling and finite element analysis of spur gear pairs having normal teeth based on the modification of the pressure angle
-
Published:2022-10-27
Issue:3
Volume:13
Page:285-297
-
ISSN:2062-0810
-
Container-title:International Review of Applied Sciences and Engineering
-
language:
-
Short-container-title:IRASE
Affiliation:
1. Department of Mechanical Engineering, University of Debrecen, Debrecen, Ótemető str. 2-4, H-4028, Debrecen, Hungary
Abstract
Abstract
The aim of the thesis is the geometric design, CAD modelling and TCA of spur gear pairs having normal teeth based on the modification of the pressure angle. The first task is the geometric design and CAD modelling of the gear pairs (5 pairs are designed) where only the pressure angle is modified beside the constancy of the other initial parameters. The second task is to analyse the comparison possibility and the accuracy similarity of the 2D and the 3D models by the Hertz (equivalent) stress analysis. Finally, I give analysis of the maximum equivalent stress, normal stress and contact pressure for each pair while three teeth are rolling down on each other.
Funder
European Union
European Social Fund
Publisher
Akademiai Kiado Zrt.
Subject
Management Science and Operations Research,General Engineering,Materials Science (miscellaneous),Information Systems,Environmental Engineering,Architecture
Reference14 articles.
1. Computer aided designing and modelling of spur gear pairs having normal and modified straight teeth;S.
Bodzás,2019
2. Analysis of the effect of the addendum modification coefficient for contact surfaces of spur gear;S.
Bodzás,2019
3. Tooth contact analysis of spur gear pairs having normal straight teeth in the function of the module;S.
Bodzás,2018
4. Gépelemek III;J.
Drobni,1993
5. Fogaskerekek;Gy.
Erney,1983