Amorphous Silicon Three Color Detector

Abstract

ABSTRACTBand gap and defect engineered amorphous silicon based nipin photo diodes with bias controlled spectral response have been fabricated successfully. The devices exhibit good linearity over a wide illumination range and linearly independent spectral response curves which are required to generate a standard RGB-signal. In the bias range from -1.5 V to 1.5 V a dynamic range exceeding 90 dB for two color sensors and 80 dB for three color sensors has been observed. The general operation principle of the multispectral photo diode is discussed using a numerical simulation program. The model describes the defect state distribution of dangling bonds according to the defect-pool model and uses coherent wave propagation in the device to calculate the profile of photo generated carriers. Additionally, an analytical model has been developed to be included into standard circuit simulation programs like SPICE (Simulation Program with Integrated Circuit Emphasis). The analytical model uses linear field approximations in both i-layers of the device.