Author:
Kim J. W.,Kim S. T.,Chung S. W.,Shin J. S.,No K. S.,Wee D. M.,Lee W. J.
Abstract
ABSTRACTLead zirconate titanite (PZT) thin films have been prepared on Pt/Ti/SiO2/Si and Pt/Ta/Si2/Si substrates by electron cyclotron resonance plasma enhanced chemical vapor deposition (ECR PECVD) at low temperatures using metal-organic (MO) sources. One of the advantages of this method is the easy control of the cation concentrations in the PZT films through the adjustment of the flow rates of each MO sources. The film compositional ratio Ti/Zr was found to be linearly proportional to the flow rate ratio of the input Ti and Zr MO sources. The Pb/(Zr+Ti) ratio was not so much affected by the Ti source flow rate but was inversely proportional to the Zr source flow rate. Pb concentration in the deposited PZT films increased with increasing Ti source flow rate and with decreasing substrate temperature. Perovskite single phase PZT films were successfully fabricated at low temperatures below 500 °C. The perovskite structure was obtained when the Pb/(Zr+Ti) ratio in the deposited film was close to 1.
Publisher
Springer Science and Business Media LLC
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献