Author:
Charlet Barbara,Davies Kerrie E.
Abstract
AbstractPZT films were etched in an ECR microwave reactor with RF polarization.The etch rate was evaluated using various gas mixtures including combinations of two of the following: C12, NF3, SF6 and HBr. The etch rate was measured as a function of the percentage of one gas in the mixture. Other parameters investigated included gas pressure, bias voltage on the electrode and substrate temperature.Results of the effect of temperature show that etch rates are higher on high temperature substrates than on low temperature substrates. A mixture of C12 and SF2 provided a PZT etch rate of 750 Å / min on a substrate, at approximately 100 °C. We evaluated the resultant etch profile and surface roughness
Publisher
Springer Science and Business Media LLC
Reference6 articles.
1. Fabrication and applications of piezo-and ferroelectric films
2. 3. Asselanis D. , Mancha D. , US Patent N°4,759,823 Jul (1988)
3. MRS Proc.;Poor;Ferroelectric Thin Films,1991
Cited by
10 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献