Prevention of Corner Voiding in Selective CVD Deposition of Titanium Silicide on SOI Device

Abstract

AbstractIn the application of selective CVD of titanium silicide to SOI devices, voids were observed at the bottom corner of the spacers, which caused reduction of drain current and in extreme cases formed an open circuit. Test structures were constructed to monitor void formation. It was found the voiding became serious when the thickness of the Si film was reduced. Adjusting the deposition condition by reducing the TiCi4 flow rate or by using a two-step deposition process was able to significantly reduce the chance of void formation. On very thin Si films, voiding can be prevented by depositing a selective Si layer prior to silicide deposition.