Author:
Tsui T. Y.,Oliver W. C.,Pharr G. M.
Abstract
AbstractNanoindentation is a common technique for measuring the mechanical properties of thin films. Here, we address the potential measurement errors caused by pile-up when soft films deposited on hard substrates are tested by nanoindentation methods. Pile-up is exacerbated in soft film / hard substrate systems because of the constraint the substrate exerts on plastic deformation of the film. To experimentally examine pile-up effects, aluminum films with thicknesses of 240 and 1700 nm were deposited on hard glass substrates and tested by standard nanoindentation techniques. The aluminum/glass system is interesting because the film and substrate have similar elastic moduli; thus, any unusual behavior in the nanoindentation results may be attributed to differences in the plastic flow characteristics alone. A detailed scanning electron microscopy examination of nanoindentation hardness impressions in the film revealed that common methods for analyzing nanoindentation data underestimate the true contact areas by as much as 80%, which results in overestimations of the hardness and modulus by as much as 80% and 35%, respectively. The sources of these errors and their influence on the measurement of hardness and elastic modulus are discussed, and a simple model for the composite hardness of the film/substrate system is developed. The model could prove useful in measuring the hardness and elastic modulus of soft-film / hard substrate systems when it is not possible to make indentations shallow enough to avoid the substrate influences.
Publisher
Springer Science and Business Media LLC
Cited by
31 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献