Role of Implant Energy on Defect Structures for Phosphorus Implanted Silicon

Abstract

AbstractA series of 18 wafers were implanted with phosphorus ions covering an energy range of 25 to 180 keV at a dose of 1 × 1015 cm−2 using a Waycool end station which provides good contact between the wafers and a thermal sink. Half the wafers had {100} surfaces and the other half {111} surfaces. The morphology of the as-implanted surface, defined by the thickness of the amorphous layer and whether that layer was submerged or lay at the surface, was affected by implant energy and surface orientation. After a 550°C regrowth and an activation anneal of 30 minutes at 900°C, the defect structures were evaluated by plan and cross-sectional transmission electron microscopy. A dear correlation was found between the implant morphology, the wafer orientation, and the defect structures.