Noise Separation Technique for Enhancing Substation Noise Assessment Using the Phase Conjugation Method

Abstract

The intrinsic noise of different transformers in the same substation belongs to the same type of noise, which is strongly coherent and difficult to separate, greatly increasing the cost of substation noise assessment and treatment. To solve the problem, the present paper proposes a noise separation technique using the phase conjugation method to separate the intrinsic noise signals of different transformers: firstly, the reconstruction of sound source information is realized by the phase conjugation method based on the measurement and emission of a line array; secondly, the intrinsic noise signals of the sound source are obtained by the equivalent point source method. The error of the separation technique is analyzed by point source simulation, and the optimal arrangement form of the microphone line array is studied. A validation experiment in a semi-anechoic chamber is also carried out, and the results prove that the error of separation technique is less than 2dBA, which is the error tolerance of engineering applications. Finally, a noise separation test of three transformers is performed in a substation using the proposed technique. The results show that the proposed technique is able to realize the intrinsic noise separation of each transformer in the substation, which is of positive significance for substation noise assessment and management.