Affiliation:
1. Department of Engineering Mechanics, Faculty of Engineering, University of Rijeka, 51000 Rijeka, Croatia
Abstract
In this paper, the dynamic response of a Euler–Bernoulli beam subjected to transverse harmonic forces is calculated. The method of separation of variables combined with the mode shape superposition method, which includes the determination of eigenvalues, is used to define the velocity field of the beam surface. The Rayleigh integral was used to calculate the sound radiation and the beam was placed in an infinite baffle. Additional actuators are introduced in order to minimize the sound radiation, or, more specifically, the total sound power level of the vibrating beam, and their optimal position and force amplitude are determined; the conclusions were drawn from the optimization results. This paper proposes a method for faster determination of the optimal actuator parameters in order to achieve the minimum total sound power level. The validity of the obtained results is demonstrated with examples, whose solutions are compared to the results in the published literature.
Subject
General Medicine,General Chemistry
Reference21 articles.
1. Dimino, I., and Aliabadi, F. (2015). Active Control of Aircraft Cabin Noise, Imperial College Press.
2. Preumont, A. (2003). Vibration Control of Active Structures, Kluwer Academic Publishers. [2nd ed.].
3. Fahy, F., and Gardonio, P. (2007). Sound and Structural Vibration: Radiation, Transmission and Response, Academic Press. [2nd ed.].
4. Sound enhancement of orthotropic sound radiation plates using line loads and considering resonance characteristics;Nayan;Acoustics,2021
5. Mutual-radiation efficiency estimation of vibration modes by finite element method and boundary element method software;Wei;J. Low Freq. Noise Vib. Act. Control,2022