Study on the Quantitative Characterization and Heterogeneity of Pore Structure in Deep Ultra-High Pressure Tight Glutenite Reservoirs

Abstract

The precise characterization of a tight glutenite reservoir’s microscopic pore structure is essential for its efficient development. However, it is difficult to accurately evaluate using a single method, and its microscopic heterogeneity is not fully understood. In this study, a combination of X-ray diffraction, casting thin section observations, scanning electron microscopy, high-pressure mercury injection, constant-speed mercury injection, X-ray computed tomography, and the advanced mathematical algorithms in the AVIZO 8.0 visualization software was used to construct the three-dimensional digital core of a glutenite reservoir at the study site, and the parameters of the pore network model were extracted. The overall microscopic pore structure characteristics were quantitatively investigated from multiple scales. Based on this, the mineral quantitative evaluation system (QEMSCAN) examined the microscopic heterogeneity of the glutenite reservoir and its impact on seepage. The results show that the glutenite reservoir in the study block can be classified into three categories based on lithology and capillary pressure curve characteristics. The type I reservoir samples have large and wide pore throats, low threshold pressure, and high reservoir quality; type II reservoir samples are characterized by medium-sized pore throat, medium threshold pressure, and moderate reservoir quality; and the small and narrow pore throat, high threshold pressure, and poor reservoir quality are characteristics of type III reservoir samples. The various pore throat types and mineral distributions are due to the differences in dissolution, compaction, and cementation. The continuous sheet pores have good connectivity, which is related to the interconnection of primary intergranular pores and strip fractures, while the connectivity of isolated pores is significantly poor, which is related to the development of intragranular dissolved pores and intercrystalline pores. This suggests the deterioration of physical properties and pore throat connectivity, reduced average pore radius, and decreased pore sorting as decreasing permeability. The tight glutenite pores range in size from 5 nm to 80 μm and primarily feature Gaussian and bimodal distribution patterns, and submicron–micron pores contribute more to seepage. The effective pores were found to be attributed to the slowing effect of abnormally high pressure on the vertical stress, and the protective effect was positively correlated with the high-pressure strength. Notably, there is strong microscopic heterogeneity in the distribution of the reservoir matrix minerals and the pore throat size. As a result, the injected fluid easily flows along the preferential seepage channel with pore development and connectivity. This study provides new insights into the exploration and development of similar tight reservoirs.