Affiliation:
1. National Institute for Material Science, Tsukuba 305-0047, Ibaraki, Japan
Abstract
The impact resistance and machinability of TiAl alloys, which are used for jet engine turbine blades, are critical for ensuring reliability and reducing manufacturing costs. This study investigated the effects of the microstructure on these properties using Ti–Al–Cr ternary alloys via Charpy impact tests at room temperature and 700 °C and performing cutting tests using a face mill with cemented carbide tools. As a result, it was confirmed that six types of typical microstructures of TiAl alloys, namely, fine FL, coarse FL, L + γ, γ, γ + β, and L + γ + β, could be formed by varying the Al and Cr concentrations and heat-treatment conditions. Impact resistance and machinability are each the exact opposite trends to the other, with coarse FL having the best impact resistance but poor machinability. Meanwhile, γ has the best machinability but the weakest impact resistance. L + γ has no major drawbacks, including creep strength. As the microstructure of TiAl4822, currently used in LEAP (leading edge aviation propulsion) engine blades, is almost a γ single-phase microstructure, we assumed that manufacturers chose this microstructure to improve machinability and thus reduce the cost. However, because the γ microstructure has the lowest impact resistance, caution should be exercised when applying it to other engines with different operating environment. On the other hand, the microstructure containing the β phase is inferior in all aspects, including creep strength. Thus, it is questionable to use TiAl-forged materials with a residual β phase in small-sized products that can be manufactured by casting.
Subject
General Materials Science,Metals and Alloys
Reference38 articles.
1. Application of cast gamma TiAl for automobiles;Noda;Intermetallics,1998
2. Development of a TiAl turbocharger for passenger vehicles;Tetsui;Mater. Sci. Eng. A,2002
3. Burtscher, M., Klein, T., Lindemann, J., Lehmann, O., Fellmann, H., Güther, V., Clemens, H., and Mayer, S. (2020). An advanced TiAl alloy for high-performance racing applications. Metals, 13.
4. High-temperature materials for aerospace applications: Ni-based superalloys and TiAl alloys;Perrut;Comptes Rendus Phys.,2018
5. Influence of microstructure on tensile and creep properties of a new castable TiAl-based alloy;Grange;Metall. Mater. Trans. A,2004
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献