Author:
Park Sang-Sun,Shin Na-Young,Lee Chanmin,Jeon Yukwon,Chi Won Seok,Shul Yong-Gun
Abstract
The effect of the Au coated printed circuit board (PCB) as a current collector on the performance of fuel cells is demonstrated. In this study, optimized pulse electroplating was introduced, which was found to be much more effective compared to the direct current (DC) plating for the PCB fabrication based on the passive area from the potentiodynamic polarization scan. Variable electrochemical parameters such as applied potential and frequency for the pulse electroplating method are controlled. Using the polarization tests, the corrosion behavior of the Au coated PCB layer was also observed. From these basic data, the coating methods and electrochemical parameters were systematically controlled to achieve efficient results for direct methanol fuel cells (DMFCs). The stability test for the cell operation indicates that the micro DMFC with the Au coated PCB substrate formed at a frequency of 10 Hz exhibited the highest stability and performance. As a result, the Au coated PCB substrate using pulse electroplating at 1.5 V and 1 kHz can be a promising current collector for portable DMFCs.
Subject
Energy (miscellaneous),Energy Engineering and Power Technology,Renewable Energy, Sustainability and the Environment,Electrical and Electronic Engineering,Control and Optimization,Engineering (miscellaneous)
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献