Affiliation:
1. Faculty of Chemical and Metallurgical Engineering, Metallurgical and Materials Engineering, ITU Ayazaga Campus, Istanbul Technical University, 34469 Istanbul, Turkey
Abstract
In this study, the relationship between macro segregation and the equiaxed zone in high-carbon grades with continuous casting parameters was investigated and optimized at the İsdemir iron and steel plant. The work was conducted for the 1080 quality of the SAE J403 standard. In this study, some parameters, such as casting speed, secondary cooling, EMS current value and EMS frequency value, were examined. When the results of the experiments are examined, it can be observed that the equiaxed zone in the macrostructure decreases significantly with the reduction of the EMS frequency value. The decrease in casting speed and increase in EMS current value caused an increase in the equiaxed zone. The increment in secondary cooling led to a decline in the equiaxed zone. Once the macro segregation results are examined, it can be seen that it is very important to optimize the continuous casting parameters in order to reduce the macro segregation results of—especially—carbon, sulfur and phosphorus elements. It has also been determined that the macro segregation values of carbon, sulfur and phosphorus elements are low in casting conditions where casting speed is low, and the EMS current value and EMS frequency value are high. In addition, macro segregation measurements of manganese, silicon, chromium and vanadium elements are found to be low under similar casting conditions. It is critical to optimize the continuous casting parameters before production, especially in high-carbon grades to be used for prestressed concrete wire and cord wire applications. As a result of the work conducted using the İsdemir billet continuous casting machine for the 1080-grade SAE J403 standard, aiming to optimize macro segregation and the equiaxed zone, the effective results have been achieved by using process parameters of 2.8 m/min casting speed, 360 A EMS current, 5 Hz EMS frequency and low secondary cooling intensity.
Subject
General Materials Science,Metals and Alloys