Abstract
This paper aims to study the Al2O3/Ti ceramic-metal composite obtained by the slip casting method. Samples containing 50% volume of the solid phase, including 10% volume of the metallic phase, were investigated. The rheological properties were analyzed. Thermogravimetric analysis was performed. The properties of the obtained composite determined the phase composition using and SEM/EDS microstructural analysis and the XRD method. The size of the titanium particles equals 20.6 ± 10.1 mm, which corresponds to 27.5% of the initial size and indicates significant fragmentation of the titanium powder during the manufacturing of the composite. The relative density of the fabricated composites was equal to 99%. The slip casting method allows to obtain the proposed composite additionally enhanced by the presence of TiO2 and Al2TiO5 (thialite). Research results revealed a non-Newtonian character of the composite suspension flow with clear thinning under the influence of increasing shear forces. The obtained composites are characterized by the lack of visible defects (cracks, microcracks and delamination) on the surface.
Funder
Military University of Technology
Subject
General Materials Science
Reference38 articles.
1. Properties advanced of the silicon nitride based ceramics and recent performance on automotive parts manufacture by machining process: Advanced Ceramics, demand Forecast;Nono;SAE Tech. Pap.,2008
2. Mechanical Properties of Silicon Nitride-Based Ceramics and Its Use in Structural Applications at High Temperatures;Matovic;Mat. Sci. Eng. A Struct.,2010
3. Boyle, R.J., Parikh, A.H., and Nagpal, V.K. (2019, January 17–21). Design Considerations for Ceramic Matrix Composite High Pressure Turbine Blades. Proceedings of the ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. Volume 6: Ceramics; Controls, Diagnostics, and Instrumentation; Education; Manufacturing Materials and Metallurgy, Phoenix, AZ, USA. V006T02A014. ASME.
4. Fracture toughness of an α-Al2O3 ceramic for joint prostheses under sinter and sinter-HIP conditions;Echeberria;Int. J. Refract. Met. Hard Mater.,2009
5. Microstructural and Mechanical Properties of Alumina (Al2O3) Matrix Composites Reinforced with SiC from Rice Husk by Spark Plasma Sintering;Alweendo;Mater. Res.,2020
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献