Highly Selective pH-Dependent Ozonation of Cyclohexane over Mn/γ-Al2O3 Catalysts at Ambient Reaction Conditions

Abstract

The selective oxidation of cyclohexane to a mixture of cyclohexanol and cyclohexanone (KA oil) is one of the imperative reactions in industrial processes. In this study, the catalytic performance of manganese-supported gamma alumina (Mn/γ-Al2O3) catalysts is investigated in the selective oxidation of cyclohexane at ambient conditions using ozone. The catalysts were prepared by the wet impregnation method, and their physio-chemical properties were studied by Fourier Transform Infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) spectroscopy, Scanning Electron Microscopy-Energy Dispersive X-ray spectroscopy (SEM-EDX), Transmission Electron Microscopy (TEM), Inductively Coupled Plasma (ICP) spectroscopy, and Brunauer Emmett and Teller (BET). The reaction conditions were optimised considering various parameters such as reaction time, pH, and various percentages of the manganese supported in gamma alumina. The oxidation of cyclohexane was conducted in an impinger reactor unit at pH 3, 7, and 11 for 1 h of ozonation time. The aliquots were collected after 30 min and 1 h of ozonation time and analysed with GC-MS and FT-IR spectroscopy. The 2.5% Mn/γ-Al2O3 catalyst exhibited a significantly enhanced catalytic performance at pH 3 and 7 with a percentage conversion of 9% and 15% at pH 3 and 7, respectively, after 30 min of ozonation time. However, after 1 h of ozonation time, the percentage conversions were increased to 23% and 29% at pH 3 and 7, respectively. At pH 11, 5% Mn/γ-Al2O3 exhibit high catalytic performance with a percentage conversion of 19% and 31% after 30 minutes and 1 h of ozonation time, respectively. The percentage selectivity obtained is 100% toward KA oil and/or cyclohexanone depending on pH and reaction time.