Effects of Surface Modification with Stearic Acid on the Dispersion of Some Inorganic Fillers in PE Matrix

Abstract

To evaluate the effects of surface modification with stearic acid on the dispersion of some inorganic fillers in polyethylene (PE) matrix, masterbatches containing 20–40 wt% of stearic acid uncoated and coated inorganic fillers and the linear low-density polyethylene (LLDPE) films containing 3–7% stearic acid uncoated and coated inorganic fillers were prepared. Two types of inorganic fillers used in the masterbatch included bentonite and silica. The structural change of inorganic fillers, whose surface was modified with stearic acid, was studied using IR spectroscopy. The dispersion of inorganic fillers in LLDPE matrix was evaluated using scanning electron microscope (masterbatch samples) and optical microscope (film samples). Changes in the melting temperature of LLDPE in the presence of inorganic fillers were evaluated by using differential scanning calorimeter (DSC). The mechanical properties of the films were evaluated according to ASTM D882. Surface-treated fillers with stearic acid dispersed in the masterbatches and films better than untreated fillers did. Stearic acid did not change the melting temperature of the filler/PE masterbatches. The mechanical properties of the films containing stearic acid coated fillers were higher than those containing unmodified fillers.