An Experimental Investigation of Static Properties of Bio-Oils and SAE40 Oil in Journal Bearing Applications

Abstract

Considerable research has been conducted in the past decade and a half regarding the bio-lubricants potential to replace mineral-based lubricants as mainstream lubricants such as engine oil, hydraulic oil, compressor oil, and metalworking oil. This study studied several bio-lubricants (rapeseed oil, palm olein, and soybean oil) and a mineral-based lubricant, SAE40. The bio-lubricants have better physiochemical, tribological characteristics and environmental friendly nature, and are promising to replace mineral-based lubricants. In this study, a journal bearing test rig (JBTR) was developed in order to investigate the effect of journal speed on the temperature of oil film with time. Additionally, the load-carrying capacity of bio-oils was tested against the mineral-based lubricant SAE40 by adding a load on the journal. For all three speeds, i.e., 1000, 1500, and 2000 rpm, the bio-lubricants recorded minimum temperature. At 1000 rpm, rapeseed oil recorded a 9.2% lower temperature than SAE40. Similarly, at 2000 rpm, rapeseed oil recorded a minimum temperature that was 2.5% lower than SAE40; in comparison, at 1500 rpm, palm olein recorded a minimum temperature that was 1.8% less than SAE40. Overall, the results of this study revealed that bio-oils recorded a lower temperature rise than mineral oil. These results are very encouraging for further research in this area.