Evaluation of Stoffenmanager and a New Exposure Model for Estimating Occupational Exposure to Styrene in the Fiberglass Reinforced Plastics Lamination Process

Abstract

This study aims to evaluate occupational exposure models by comparing model estimations of Stoffenmanager, version 8.2, and exposure scores calculated using a new exposure model with personal exposure measurements for styrene used in the fiberglass-reinforced plastic (FRP) lamination processes in Korea. Using the collected exposure measurements (n = 160) with detailed contextual information about the type of process, working conditions, local exhaust ventilation, respiratory protections, and task descriptions, we developed a new model algorithm to estimate the score for occupational exposures on situation level. We assumed that the source of exposure originates from the near field only (within the breathing zone of workers). The new model is designed as a simple formula of multiplying scores for job classification, exposure potential, engineering controls, chemical hazard, and exposure probability and then dividing the score for workplace size. The final score is log-transformed, ranging from 1 to 14, and the exposure category is divided into four ratings: no exposure (1), low (2), medium (3), and high (4) exposures. Using the contextual information, all the parameters and modifying factors are similarly entered into the two models through direct translation and coding processes with expert judgement, and the exposure estimations and scores using the two models are calculated for each situation. Overall bias and precision for Stoffenmanager are −1.00 ± 2.07 (50th) and −0.32 ± 2.32 (90th) for all situations (n = 36), indicating that Stoffenmanager slightly underestimated styrene exposures. Pearson’s correlation coefficients are significantly high for Stoffenmanager (r = 0.87) and the new model (r = 0.88), and the correlation between the two models is significantly high (r = 0.93) (p < 0.01). Therefore, the model estimations using Stoffenmanager and the new model are significantly correlated with the styrene exposures in the FRP lamination process. Further studies are needed to validate and calibrate the models using a larger number of exposure measurements for various substances in the future.