Compact Current Reference Circuits with Low Temperature Drift and High Compliance Voltage

Abstract

Highly accurate and stable current references are especially required for resistive-sensor conditioning. The solutions typically adopted in using resistors and op-amps/transistors display performance mainly limited by resistors accuracy and active components non-linearities. In this work, excellent characteristics of LT199x selectable gain amplifiers are exploited to precisely divide an input current. Supplied with a 100 µA reference IC, the divider is able to exactly source either a ~1 µA or a ~0.1 µA current. Moreover, the proposed solution allows to generate a different value for the output current by modifying only some connections without requiring the use of additional components. Experimental results show that the compliance voltage of the generator is close to the power supply limits, with an equivalent output resistance of about 100 GΩ, while the thermal coefficient is less than 10 ppm/°C between 10 and 40 °C. Circuit architecture also guarantees physical separation of current carrying electrodes from voltage sensing ones, thus simplifying front-end sensor-interface circuitry. Emulating a resistive-sensor in the 10 kΩ–100 MΩ range, an excellent linearity is found with a relative error within ±0.1% after a preliminary calibration procedure. Further advantage is that compliance voltage can be opposite in sign of that obtained with a passive component; therefore, the system is also suitable for conditioning active sensors.