Abstract
To produce quicklime, high calcium carbonate rocks, including limestone, are burned in industrial kilns at 1100–1450 °C. As a consequence of the high temperatures, the carbonate rock can break and decrepitate into fine material, causing operational problems and material losses. In the present paper, an industrial case study on thermal decrepitation was performed on Boda Limestone from the Jutjärn quarry in Dalarna, Sweden. We analyzed 80 limestone samples for thermal decrepitation; furthermore, the correlation with chemical composition was statistically analyzed. The experiments were complemented by a detailed analysis of thermally-induced cracking at a range of temperatures (ambient, 500 °C, 800 °C, and 1150 °C) for two limestone samples with similar chemical compositions but with very different decrepitation behaviors. Decrepitation was analyzed by an in-house method, the chemical composition by XRF, and the thermally-induced cracking was investigated by SEM and image analysis. No strong correlation was found between thermal decrepitation and the chemical composition of the limestone. For the sample with low thermal decrepitation, a dense narrow network of fractures was found after full calcination; however, this network was not observed in the sample with high thermal decrepitation. A plausible explanation for the different decrepitation behaviors is that this fracture network releases internal stress and stabilizes the calcined rock. The obtained results can help in predicting limestone thermal decrepitation, enabling increased resource efficiency in quicklime production.
Funder
Swedish Mineral Processing Research Association
Swedish Energy Agency
Subject
Geology,Geotechnical Engineering and Engineering Geology
Reference43 articles.
1. Management of Lime in Steel
2. Chemistry and Technology of Lime and Limestone;Boynton,1980
3. Investigation and prediction of sticking tendency, blocks formation and occasional melting of lime at HT (1300 °C) by the overburning test method
4. Best Available Techniques (BAT) Reference Document for the Production of Cement, Lime and Magnesium Oxide;Schorcht,2013
5. Mechanical Degradation and Drop Test,2020
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献