The Analysis of the Morphology of the Saddle-Shaped Bronze Chips Briquettes Produced in the Roller Press

Abstract

This paper presents the results of the investigations of the properties of saddle-shaped copper alloy chips briquettes produced in a roller press. The physical and mechanical properties of the investigated briquettes were examined on their external surfaces as well as on their cross-sections. The density, chemical composition, microstructure analysis obtained with a 3D and scanning microscope, surface roughness and hardness of the obtained briquettes were investigated. The research proved the differentiation of the physical and mechanical properties of briquettes depending on the investigated area of their surface. The analysis of changes in the porosity of briquettes on their cross-section showed zones of various densification levels. This research expands the knowledge of the processes taking place during the compaction and consolidation of granular materials in roller presses as well as the knowledge concerning designing the geometry of forming tools.