The Effect of Multi-Step Tempering and Partition Heat Treatment on 25Cr2Ni3MoV Steel’s Cryogenic Strength Properties

Abstract

In this study, the refinement of two microstructures was controlled in medium carbon 25Cr2Ni3MoV steel via multi-step tempering and partition (MTP) to achieve high cryogenic strength–ductility combinations. Microstructure evolution, the distribution of stress concentration, and microcrack formation and propagation during cryogenic Charpy impact testing were investigated. Compared with their performance in the quenching and tempering states (QT), the MTP steels showed a significant improvement in yield strength (1300 MPa), total elongation (25%), and impact toughness (>25 J) at liquid nitrogen temperature (LNT). The strengthening contributions mainly originated from the high dislocation density and refinement cementite (size: 70 nm) in the martensite lath (width: 1.5 μm) introduced by refined reversed austenite and its latter decomposition. The instrumented Charpy impact results indicated that cracks nucleated in the primary austenite grain (PAG) boundary for two steels due to the strain concentration band preferring to appear near PAGs, while cracks in the QT and MTP samples propagated along the PAGs and high-angle grain boundary (HAGB), respectively. The crystallized plasticity finite element simulation revealed that the PAG boundary with cementite precipitates of large size (>200 nm) was less able to dissipate crack propagation energy than the HAGBs by continuously forming a high strain concentration area, thus leading to the low-impact toughness of the QT steel.