Neural Network-Based Prediction: The Case of Reinforced Concrete Members under Simple and Complex Loading

Abstract

The objective of this study is to compare conventional models used for estimating the load carrying capacity of reinforced concrete (RC) members, i.e., Current Design Codes (CDCs), with the method based on different assumptions, i.e., the Compressive Force Path (CFP) method and a non-conventional problem solver, i.e., an Artificial Neural Network (ANN). For this purpose, four different databases with the details of the critical parameters of (i) RC beams in simply supported conditions without transverse steel or stirrups (BWOS) and RC beams in simply supported conditions with transverse steel or stirrups (BWS), (ii) RC columns with cantilever-supported conditions (CWA), (iii) RC T-beams in simply supported conditions without transverse steel or stirrups (TBWOS) and RC T-beams in simply supported conditions with transverse steel or stirrups (TBWS) and (iv) RC flat slabs in simply supported conditions under a punching load (SCS) are developed based on the data from available experimental studies. These databases obtained from the published experimental studies helped us to estimate the member response at the ultimate limit-state (ULS). The results show that the predictions of the CFP and the ANNs often correlate closer to the experimental data as compared to the CDCs.