Construction Waste Reduction through Application of Different Structural Systems for the Slab in a Commercial Building: A South Korean Case

Abstract

Construction waste generation along with the extensive consumption of natural resources has propelled researchers to investigate effective measures for minimising the waste. While several studies have shown that the structural design would be an influencing factor on the carbon dioxide emissions of a building, there is a lack of studies to corroborate the effect of different structural systems to generate waste during the construction stage. This article seeks to bridge some of the knowledge gaps regarding the waste generation from different structural systems during the construction phase in a building project in South Korea and demonstrate its potential for waste reduction. In this study, the amount of waste generation during the construction phase was calculated based on the quantities and the material loss rate of each building material to estimate the quantity of construction waste by the changes in the application of different structural systems for the slab of the studied model. The total waste generation during the construction phase of the different slab systems shows that the solid slab system produces the largest amount of construction waste, which is 101,361.385 kg. On the other hand, the void slab system generates 87,603.958 kg of the construction waste, which is the lowest amount among the four variables of this study. The additional purchasing costs due to the loss of construction materials indicate that the solid slab system would require 80,709.76 USD, which is the highest value of the four variables in this study. The void slab system would cost USD 50,054.12 for additional materials purchasing costs, which is approximately 38% lower than the solid slab system.