An Integrated Approach to Design and Develop High-Performance Polymer-Composite Thermal Interface Material

Abstract

A computational framework based on novel differential effective medium approximation and mean-field homogenization is used to design high-performance filler-laden polymer thermal interface materials (TIMs). The proposed design strategy has the capability to handle non-dilute filler concentration in the polymer matrix. The effective thermal conductivity of intended thermal interface composites can be tailored in a wide range by varying filler attributes such as size, aspect ratio, orientation, as well as filler–matrix interface with an upper limit imposed by the shear modulus. Serval potential polymers and fillers are considered at the design stage. High-density polyethylene (HDPE) and thermoplastic polyurethane (TPU) with a non-dilute concentration (~60 vol%) of ceramic fillers exhibit high thermal conductivity (4–5 W m−1 K−1) without compromising the high compliance of TIMs. The predicted thermal conductivity and coefficient of thermal expansion are in excellent agreement with measured data of various binary composite systems considering HDPE, TPU, and polypropylene (PP) loaded with Al2O3 and AlN fillers in varying sizes, shapes, and concentrations, prepared via the melt-mixing and compression-molding route. The model also validates that manipulating filler alignment and aspect ratio can significantly contribute to making heat-conducting networks in composites, which results in ultra-high thermal conductivity.