Advanced Control of a Compensator Motor Driving a Variable Speed Diesel Generator with Rotating Stator

Abstract

Variable speed generators can improve overall genset performance by allowing the diesel engine to reduce its speed at lower loads. In this project, a variable speed diesel generator (VSDG) uses a rotating stator driven by a compensator motor. At lower loads, the stator turns in the opposite direction of the rotor, a process that can be used for purposes like maintaining a fixed relative speed between the two components of a generator. This allows the diesel engine to turn at a lower speed (same as the rotor) and to increase its efficiency. The present research addresses the control of the compensator motor driving the generator’s stator using a variable-frequency drive that adapts the speed to its optimal value according to the load. The performance of the proposed control strategy was tested using a Freescale microcontroller card programmed in C-code to determine the appropriate voltage for the variable-frequency drive. The control algorithm uses a real-time application implemented on an FDRM-KL25Z signal processor board. The control performance of a 2 kW asynchronous motor (LabVolt EMS 8503-00/208 V/3 ϕ/60(50) Hz) was demonstrated experimentally at different operating conditions.