Sustainable Manufacturing Process in the Context of Wood Processing by Sanding

Abstract

The aim of this paper is the issue of a sustainable manufacturing process in the context of woodworking by sanding, as one of the most important technological operations before its final treatment, focusing on a selected pillar of sustainable manufacturing process, waste management. The first step of the experiment was to optimize the pressures of the sanding means on the surface. The optimal pressure of 1.04 N·cm−2 was chosen. The second level was to obtain the wear curves of the abrasive means with grain size 80 (evaluated by wood removal) and the optimal pressure in dependence on the sanding direction (along and perpendicular to the wood fibres and in the direction of 60° to the wood fibres) and different types of woods (beech, oak, alder, pine). The set parameters were suitable for beech and were not suitable for alder and pine. By extending the operating life of the sanding belts via appropriate choice of input factor settings it can be influenced metrics of pillar waste management-savings of material and waste minimization.