Author:
Liu Rui,Zhang Mengyu,Yu Jiacheng,Yang Qifan,Gao Shiyou
Abstract
A Co-based alloy coating was deposited on H13 steel substrate via pulsed Nd:YAG laser and the corrosion resistance to and mechanism of corrosion in molten aluminum were explored. The results showed that the coating was mainly composed of γ-Co dendrite and M23C6 precipitation. The average hardness in the cladding layer was 732.6 HV0.5, which was 3.55 times greater than that of the H13 substrate. During the molten aluminum corrosion test, the surface of the Co-based alloy coating was immersed for 4, 8, 16 and 24 h at 700 °C. The corrosion rate decreased with increases in aluminum erosion time. It was observed that there were two intermediate layers between the coating and the liquid Al, with (Co, Fe, Cr)2Al9 intermetallic compounds (IMCs) layer near the coating side and the (Fe, Cr)4Al13 and (Co, Fe, Cr)2Al5 intermetallic compounds (IMCs) layer near the Al solidification side. After 24 h of static corrosion, the Co-based alloy coating could still maintain its integrity to protect the substrate.
Funder
Natural Science Foundation of Hebei Province
Subject
Materials Chemistry,Surfaces, Coatings and Films,Surfaces and Interfaces
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献