Abstract
In this article, a triple-band quad-element stacked multiple-input–multiple-output (MIMO) antenna is proposed for sensing applications. Each radiating element of the presented MIMO antenna consists of a diagonally truncated square patch, which is proximity coupled to the elliptical radiating patch. The proposed MIMO antenna is designed to resonate for three frequencies (4.2, 4.8, and 5.8 GHz) in the C-band range. The antenna shows circular polarization characteristics at 4.2 and 4.8 GHz frequencies. Each stacked element of the proposed antenna is excited independently through a 50 Ω coaxial feed. The Rogers RT Duroid/5880 dielectric substrate is used for the fabrication of two layers of the stacked MIMO antenna. The presented stacked MIMO antenna simulation and experimental outcomes are in good agreement.
Subject
Electrical and Electronic Engineering,Mechanical Engineering,Control and Systems Engineering
Reference29 articles.
1. MIMO/diversity antenna with neutralization line for WLAN applications;Birwal;MAPAN,2021
2. Wideband circularly polarized textile MIMO antenna for wearable applications;Kumar;IEEE Access,2021
3. Quad-port UWB MIMO footwear antenna for wearable applications;Jayant;IEEE Trans. Antennas Propag.,2022
4. Design and performance analysis of a frequency reconfigurable four-element multiple-input-multiple-output antenna;Singh;AEU—Int. J. Electron. Commun.,2022
5. Kumar, S., Lee, G.H., Kim, D.H., Choi, H.C., and Kim, K.W. (2020). Dual circularly polarized planar four-port MIMO antenna with wide axial-ratio bandwidth. Sensors, 20.
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献