Abstract
The main goal of this work was to measure the total alkaloid content (TALC) from pulp, peel, seed, and columella of soursop fruit (Annona muricata L.) by ultrasound-assisted extraction (UAE) and to obtain the best conditions of the UAE with the response surface methodology (RSM). We evaluated the effect of amplitude (40%, 70%, and 100%), time (5, 10, and 15 min) and pulse-cycles (0.4, 0.7, and 1 s) and compared the best UAE conditions of alkaloids with a conventional extraction (maceration). The structural characterization of the raw material with the highest TALC was developed using nuclear magnetic resonance (NMR) techniques [1H, 13C, heteronuclear single quantum correlation (HSQC), heteronuclear multiple bond correlation (HMBC), and homonuclear correlation spectroscopy (COSY)]. According to the RSM, the best conditions in the UAE for extracting alkaloids varied depending on the type of plant tissue. It took 5 min with an amplitude of 70% and pulse-cycles of 1, 0.4, and 1 s, respectively, to extract the highest TALC in peel, seed, and columella while the optimal conditions for extracting the largest amount of alkaloids from the pulp were obtained at 5 min in UAE with pulse-cycles of 0.55 s and 100% amplitude. The TALC was highest in the peel (7.48 mg/g), which was followed by the seed (2.31 mg/g), the pulp (1.20 mg/g), and the columella (0.79 mg/g) and was positively correlated (R2 = 0.98–0.88) with the predicted values. In addition, the extraction alkaloids from the peel, pulp, seed, and columella using the UAE was 56.31, 5.45, 3.06, and 2.96 times higher, respectively, than the extraction by maceration. The alkaloids identified in the peel have not been reported and were nornuciferin, assimilobin, anonaine, and isolaureline. This study showed that the soursop fruit peel can be a source of alkaloids and that UAE has an important potential for extracting these compounds.
Subject
Fluid Flow and Transfer Processes,Computer Science Applications,Process Chemistry and Technology,General Engineering,Instrumentation,General Materials Science