Contributions of Microbial “Contact Leaching” to Pyrite Oxidation under Different Controlled Redox Potentials

Abstract

The function of microbial contact leaching to pyrite oxidation was investigated by analyzing the differences of residue morphologies, leaching rates, surface products, and microbial consortia under different conditions in this study. This was achieved by novel equipment that can control the redox potential of the solution and isolate pyrite from microbial contact oxidation. The morphology of residues showed that the corrosions were a little bit severer in the presence of attached microbes under 750 mV and 850 mV (vs. SHE). At 650 mV, the oxidation of pyrite was undetectable even in the presence of attached microbes. The pyrite dissolution rate was higher with attached microbes than that without attached microbes at 750 mV and 850 mV. The elemental sulfur on the surface of pyrite residues with sessile microorganisms was much less than that without attached microbes at 750 mV and 850 mV, showing that sessile acidophiles may accelerate pyrite leaching by reducing the elemental sulfur inhibition. Many more sulfur-oxidizers were found in the sessile microbial consortium which also supported the idea. The results suggest that the microbial “contact leaching” to pyrite oxidation is limited and relies on the elimination of elemental sulfur passivation by attached sulfur-oxidizing microbes rather than the contact oxidation by EPS-Fe.