Research on the Processes of Injecting CO2 into Coal Seams with CH4 Recovery Using Horizontal Wells

Abstract

The paper presents a research study on modeling and computer simulation of injecting CO2 into the coal seams of the Upper Silesian Coal Basin, Poland connected with enhanced coal bed methane (ECBM) recovery. In the initial stage of the research activities, a structural parameter model was developed specifically with reference to the coal-bearing formations of the Upper Carboniferous for which basic parameters of coal quality and the distribution of methane content were estimated. In addition, a lithological model of the overall reservoir structure was developed and the reservoir parameters of the storage site were analyzed. In the next stage of the research, the static model was supplemented with detailed reservoir parameters as well as the thermodynamic properties of fluids and complex gases. The paper discusses a series of simulations of an enhanced coalbed methane recovery process with a simultaneous injection of carbon dioxide. The analyses were performed using the ECLIPSE software designed for simulating coal seam processes. The results of the simulations demonstrated that the total volume of CO2 injected to a designated seam in a coal mine during the period of one year equaled 1,954,213 sm3. The total amount of water obtained from the production wells during the whole period of the simulations (6.5 years) was 9867 sm3. At the same time, 15,558,906 sm3 of gas was recovered, out of which 14,445,424 sm3 was methane. The remaining 7% of the extracted gas was carbon dioxide as a result of reverse production of the previously injected CO2. However, taking into consideration the phenomena of coal matrix shrinking and swelling, the total amount of injected CO2 decreased to approximately 625,000 sm3.