Measuring the Complex Permittivities of Plastics in Irregular Shapes

Abstract

This work presents the measurement of the complex permittivities of high density polyethylene (HDPE), linear low density polyethylene (LLDPE), low density polyethylene (LDPE), polypropylene (PP), Nylon, and thermoplastic vulcanizates (TPV) in irregular shapes at the microwave frequency. A Teflon sample holder was employed to pack irregularly shaped plastic materials with various volumetric percentages. The samples were put into a resonant cavity with an enhanced electric field in its center, which is known as the enhanced-field method (EFM). The resonant frequencies and the quality factors at different volumetric percentages were measured by a network analyzer and compared with simulated results using a full-wave simulator (high-frequency structure simulator (HFSS)). Three simulation models, layer, ring, and hybrid, are proposed and compared with the experimental results. It is found that the hybrid model (denoted as Z5R5) with five heights and five radii in the partition is the most suitable. The complex permittivities of six plastic materials were evaluated by the contour maps of the HFSS simulation using the hybrid model. The measured complex permittivities of the irregularly shaped polymers agree well with their counterparts in bulk form.