Author:
Xiao Xiangpeng,Huang Jian,Chen Jinshui,Xu Hai,Li Zhao,Zhang Jianbo
Abstract
Cu-Ni-Si alloy with a different Co content was prepared by inductive melting and hot rolling. The alloy was solution treated at 950 °C for 1.5 h and aged at 450 °C, 500 °C, and 550 °C for different times. The phase diagram calculation and transmission electron microscopy was used to investigate the effect of Co addition on the aging precipitation behavior of the Cu-Ni-Si alloy. The phase transformation kinetics equation was calculated as well. The results show that, with the increase of aging temperature, the two-phase region of Fcc + Ni2Si in the Cu-Ni-Si ternary diagram would get wider. Some NixSiy phases would also form in the Cu-rich isothermal section. The addition of Co would replace part of Ni to form the (Ni, Co)2Si phase, which inhibits the spinodal decomposition process of the Cu-Ni-Si alloy during the aging process. The precipitated phase of the Cu-Ni-Si alloy with a high content of the Co element is more likely to grow with the extension of aging time. The phase transformation kinetic equations of the Cu-Ni-Si alloy at 450 °C and 500 °C showed good agreement with the experimental results. Furthermore, it can be seen from the precipitation kinetic curve the addition of the Co element accelerates precipitation in the aging process.
Funder
National Natural Science Foundation of China
Subject
Inorganic Chemistry,Condensed Matter Physics,General Materials Science,General Chemical Engineering
Reference27 articles.
1. Transformation and strengthening of early stage of aging in Cu-3.2Ni-0.75Si alloy;Zhao;Chin. J. Nonferr. Met.,2002
2. Microstructure and mechanical properties of Cu–Ni–Si alloys
3. A new ultrahigh strength Cu–Ni–Si alloy
4. Development of Cu-Ni-Si alloy for lead frame;Liu;Mater. Res. Appl.,2007
Cited by
13 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献