A Kinetic Model for the Modification of Al2O3 Inclusions during Calcium Treatment in High-Carbon Hard Wire Steel

Abstract

Laboratory-scale experiments for the modification of Al2O3 inclusions by calcium treatment in high-carbon hard wire steel were performed and the compositions and morphological evolution of inclusions were studied. The kinetics of the modification of Al2O3 inclusions by calcium treatment were studied in high-carbon hard wire steel based on the unreacted shrinking core model, considering the transfer of Ca and Al through the boundary layer and within the product layer, coupled with thermodynamic equilibrium at the interfaces. The diffusion of Al in the inclusion layer was the limiting link in the inclusion modification process. The Ca concentration in molten steel had the greatest influence on the inclusion modification time. The modification time for inclusions tended to be longer in the transformation of higher CaO-containing calcium aluminate. The modification of Al2O3 into CA6 was fastest, while the most time was needed to modify CA into C12A7. It took about six times time longer at the later stage of inclusion modification than at the early stage. The complete modification time for inclusions increased with the square of their radii. The changes of CaO contents with melting time were estimated based on a kinetic model and was consistent with experimental results.