Author:
Hangai Yoshihiko,Kawato Daisuke,Ohashi Masataka,Ando Mizuki,Ogura Takuya,Morisada Yoshiaki,Fujii Hidetoshi,Kamakoshi Yuichiroh,Mitsugi Hironao,Amagai Kenji
Abstract
Forming aluminum foam to the desired shape while retaining its pore structures is essential for manufacturing aluminum foam products. Recently, a press forming process for aluminum foam that is performed after precursor foaming but before solidification has been proposed. In this study, to track individual pores throughout press forming immediately after foaming, X-ray radiography inspection was applied. A thin precursor was used, and foaming was constrained to the X-ray transmission direction. It was shown that, although some pores coalesced with other pores, the pores did not collapse during press forming. In addition, the porosity of aluminum foam evaluated from X-ray transmission images was constant during press forming. Some pores retained their shape during press forming but their position was changed by the material flow generated by press forming. These results show that by press forming before the solidification of aluminum foam, aluminum foam can be shaped without the collapse of pores.
Funder
Japan Science and Technology Agency
Light Metal Educational Foundation
Subject
General Materials Science,Metals and Alloys
Cited by
7 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献