Affiliation:
1. Faculty of Chemical Engineering and Environmental Protection “Cristofor Simionescu”, “Gheorghe Asachi” Technical University of Iasi, Bd. Prof. Dimitrie Mangeron, No. 73, 700050 Iaşi, Romania
Abstract
The current study deals with an examination of strategies for the sequential treatment of corn stalks (CSs) in an integrated manner aiming to obtain papermaking fibers and to recover both lignin and hemicelluloses (HCs). Several pathways of valorization were experimentally trialed, focusing on getting information from mass balance analysis in an attempt to reveal the potential outcomes in terms of pulp yield, chemical composition, and papermaking properties such as tensile and burst strength. The raw lignin amounts and purity as well as separated hemicelluloses were also characterized. In this work, pulp yields in the range of 44–50% were obtained from CSs, while lignin and hemicelluloses yielded maximum values of 10 g/100 g of CS and 6.2 g/100 g of CS, respectively. Other findings of mass balance analysis evidenced that besides the papermaking pulp, the lignin and HCs also have interesting output values. The recovered lignin yield values were shown to be less than 50% in general, meaning that even if 67 to 90% of it is removed from CSs, only about half is recovered. The removal rates of hemicelluloses were found to be in the range of approx. 30 to 60%. About 15 to 25% of the original HCs could be recovered, and polysaccharides-based products with 67 to 75% xylan content could be obtained. Some key opinions were developed regarding how the mass balance could turn as a result of the chosen CS valorization set-up. The determined antioxidant activity showed that both lignin and hemicelluloses had interesting values for IC50.
Funder
Ministry of Research, Innovation, and Digitization, CCCDI-UEFISCDI
Reference103 articles.
1. Serna-Saldivar, S.O. (2019). Corn, AACC International Press. [3rd ed.].
2. Fu, Y., Zhang, J., and Guan, T. (2023). High-Value Utilization of Corn Straw: From Waste to Wealth. Sustainability, 15.
3. Corn-Stalks and Cobs in Industry;Arnold;Sci. Mon.,1929
4. Silage review: Recent advances and future technologies for whole-plant and fractionated corn silage harvesting;Ferraretto;J. Dairy Sci.,2018
5. Sustainability in corn production management: A multi-objective approach;Tiammee;J. Clean. Prod.,2020