Influence of the Crack Angle on the Deformation and Failure Characteristics of Sandstone under Stepped Cyclic Uniaxial Compression with a Constant Lower Limit

Abstract

Engineering rock structures containing joints and fissures are frequently subjected to discontinuous periodic disturbances of varying amplitudes. To attain the quantitative relationship between the crack angle and the mechanical and deformation properties of rock under complex stress paths, uniaxial cyclic loading and unloading tests with increasing stress gradients were conducted on sandstone specimens containing a single crack of different angles. Our results showed that the bearing capacity of the sandstone increased as the crack angle increased. The irreversible strain and elastic moduli of the rock presented a sudden increase when entering the next cycle of the stepped loading. However, the entire loading process can be divided into three stages according to their respective trends. These three stages correspond to the three stages of rock deformation, i.e., the pore crack compaction stage, the elastic deformation to the stable micro-elastic crack development stage, and the unstable crack development stage. In addition, the crack angle of sandstone showed a negative correlation with the irreversible strain, but a positive correlation with the elastic modulus. With the increasing crack angle, the failure mode of the rock changed from the tensile-shear failure to the shear failure, and then to the interlayer dislocation failure.