Experimental study of the effect of crack distribution on the failure mechanism of sandstone specimens based on inclination angles and number of parallel flaws

Abstract

AbstractDiscontinuous joints are prevalent in engineered rock masses and play a significant role in the stability of the rock mass. This study aims to analyze the impact of the inclination angle and number of prefabricated flaws on the crack evolution and failure pattern of sandstone specimens. Uniaxial compression tests, along with acoustic emission technology and digital image technology, were employed to monitor and analyze the effects. The findings indicate that: (1) With the increase in the flaw inclination angle, the damage mode of the specimen transitions from tensile to compressive-shear failure. The localized high-strain region on the surface of the specimen predicts the propagation path for the formation of macroscopic cracks. (2) When the number of prefabricated flaws is small, the flaws mainly expand through tensile wing cracks. As the number of flaws increases, the inner flaw tip does not produce cracks. Instead, the failure of the entire specimen occurs along the direction of the outer flaw's tensile wing crack, with the inner flaw running through it. (3) The winged tensile crack is the first crack to appear in all rock samples, regardless of the flaw initiation angles. Finally, the stress intensity factor at the crack tip under uniaxial compression conditions, without considering the closure effect, was expressed based on fracture mechanics theory. The crack initiation angle was then calculated. The results of the theoretical calculation of the initiation angle were found to be consistent with the test results. These research findings can serve as theoretical references and provide insights into the failure mechanisms of cracked rocks and the development of disaster control methods in rock engineering.