Affiliation:
1. Key Laboratory of Impact and Safety Engineering, Ministry of Education, Ningbo University, Ningbo 315211, China
2. Ningbo Amico Copper Valves Manufacturing Inc., Ningbo 315211, China
Abstract
The dual-phase lattice structure composed of the matrix phase (MP) and the reinforcement phase (RP) is a novel hybrid lattice showing excellent energy absorption ability. However, the mechanical behavior of the dual-phase lattice structure under dynamic compression and the enhancement mechanism of the reinforcement phase have not been widely studied with the increase in compression speed. Based on the design requirements of dual-phase lattice materials, this paper combined octet-truss cell structures with different porosities, and the dual-density hybrid lattice specimens were fabricated via the fused deposition modeling technique. Under quasi-static and dynamic compressive loadings, the stress–strain behavior, energy absorption capacity, and deformation mechanism of the dual-density hybrid lattice structure were studied. The results showed that the quasi-static-specific energy absorption of the dual-density hybrid lattice structure was significantly higher than that of the single-density Octet lattice, and with the increase in compression strain rate, the effective specific energy absorption of the dual-density hybrid lattice structure also increased. The deformation mechanism of the dual-density hybrid lattice was also analyzed, and the deformation mode changed from an inclined deformation band to a horizontal deformation band when the strain rate changed from 10−3 s−1 to 100 s−1.
Funder
Natural Science Foundation of Zhejiang Province of China
Science and Technology Innovation 2025 Major Project of Ningbo
National Natural Science Foundation of China
Subject
General Materials Science
Reference41 articles.
1. Application for additive manufacturing of lattice materials on integrated aircraft structures and functions;Wang;Aeronaut. Manuf. Technol.,2018
2. Research progress of light and ultralight porous metal materials;Dai;Foundry,2020
3. 3D plate-lattices: An emerging class of low-density metamaterial exhibiting optimal isotropic stiffness;Diamantopoulou;Adv. Mater.,2018
4. Elastic isotropic design of PLA lattice structure fabricated by fuse considering material anisotropy;Wang;Chin. J. Theor. Appl. Mech.,2022
5. Research progress of metal lattice materials;Zeng;Mater. Rep.,2012
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献