Material-Preserving Extrusion of Polyamide on a Twin-Screw Extruder

Abstract

In the context of plastics recycling, plastics are processed several times. With each new melting and extrusion the plastic is damaged, which can have a negative effect on product properties. To counteract material damage, special additives such as chain extenders can be used, which are intended to lead to post-polymerization during processing. A linear chain extension is important here, as branching and crosslinking can lead to uncontrolled changes in the plastic’s properties. To investigate the suitability of specialized linear chain extenders for polyamides, a polyamide-6 was processed several times and the molar mass distribution was evaluated after each extrusion cycle. Three series of tests were carried out. First, the plastic was regranulated five times without additives and twice with different concentrations of chain extenders on a twin-screw extruder. The results of the study show that not only can molar mass degradation be prevented with the appropriate additive, it is even possible to achieve a material buildup during processing. In our experiments, the polydispersity of the molar mass distribution remained nearly identical despite multiple extrusions. Thus, reactive extrusion makes it possible for the corresponding plastics to be processed several times without the molar mass decreasing. If a sufficiently pure material flow can be ensured during recycling, the number of possible reprocessings of the plastic can be significantly increased without the need to add virgin material.