Small-Diameter Tube Wall Damage-Detection Method Based on TE01 Mode Microwave

Abstract

Accidents occur frequently in urban gas pipelines, and pipeline damage detection is an important means of ensuring pipeline safety. Aiming at the problem that the small diameter pipeline is difficult to detect, this paper proposes a detection method for the inner wall damage of a small-diameter pipeline based on the TE01 mode microwave and uses the TE01 mode to detect the inner wall damage of the pipeline by the terminal short-circuit reflection method. By analyzing the transition of microwave propagation mode at the defect, based on the Maxwell equation and the field distribution equation of the TE01 mode microwave in the pipe and the pipe wall current equation, the microwave reflection coefficient at the defect is established when the microwave distortion modes at the defect are TE and TM modes. A small-diameter pipeline simulation model is established, and the influence of the electric field, magnetic field, wall current distribution, and reflected wave reflection coefficient in the pipeline when inner wall defects of different widths are analyzed using the finite integral theory during microwave detection of the TE01 mode. An experimental platform for the microwave detection of small-diameter pipes was built to detect defects on the inner walls of pipes with different widths. The results show that the inner wall defect causes the electric field, magnetic field, current propagation period, and energy distribution of the TE01 mode microwave propagated in the pipe to be distorted, and the microwave reflection coefficient and return loss exhibit a significant frequency shift with the change in the defect width. The experimental and simulation results had a good consistency.