Abstract
In this paper, we present a simple method to design a miniaturized wideband bandpass filter with suppression of the third harmonic, using only two quarter-wavelength stepped-impedance resonators (SIRs). The resonant modes of the quarter-wavelength SIR, depending on the impedance ratio (K) and electrical length ratio (α), are discussed first. As to setting the resonant frequency of the SIR for the lower band edge of the required band, the size parameters of two quarter-wavelength SIRs can be determined by selecting the desired impedance ratio (K) and length ratio (α). By using the opposite directional arrangement of two SIRs with direct taped input/output ports, the wideband response can be formed. A filter example is shown in this study to address this simple design procedure. The measured results of the fabricated filter have a wide passband response from 3.3 to 5.8 GHz, with an insertion loss of 1.5 dB, a return loss of 20 dB, an extended bandwidth ration of 55%, a low-average group delay of less than 0.75 ns, and a stopband from 6 to 12 GHz, with an attenuation level of 20 dB. Due to the similar 0° feeding, a transmission zero at 8.3 GHz appears near the band edge; thus, improving the band selectivity. The proposed filter can have a very simple structure and a miniature size. Simulated results and measured results are in good agreement.
Subject
Electrical and Electronic Engineering,Computer Networks and Communications,Hardware and Architecture,Signal Processing,Control and Systems Engineering
Cited by
12 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献