Affiliation:
1. Electric Motor Control Laboratory, Graduate School of Automotive Engineering, Kookmin University, Seoul 02707, Republic of Korea
Abstract
Two algorithms have been extensively studied for motor control: Field Oriented Control (FOC) and Direct Torque Control (DTC). Both control algorithms use a Voltage Source Inverter (VSI) to drive a Permanent Magnet Synchronous Motor (PMSM). To prevent short-arm short-circuit accidents when driving PMSM using VSI, a dead time is used to turn off the TOP and BOTTOM switches of each arm at the same time. However, this dead-time technique causes an unexpected pole voltage to be applied to the PMSM on the VSI output voltage, causing distortion and resulting in control nonlinearity. The disturbance voltage that causes nonlinearity is difficult to measure directly with the sensor. Therefore, this paper analyzes the nonlinearity of the controller due to the distorted voltage caused by the dead time during PMSM operation using the DTC algorithm and predicts the distorted output voltage using the extended Kalman Filter (EKF) to improve control stability. As a result, The algorithm proposed in this paper has verified the improvement of torque ripple and stator flux ripple through experiments and simulations.
Subject
Electrical and Electronic Engineering,Computer Networks and Communications,Hardware and Architecture,Signal Processing,Control and Systems Engineering
Reference30 articles.
1. A New Quick-Response and High-Efficiency Control Strategy of an Induction Motor;Takahashi;IEEE Trans. Ind. Appl.,1986
2. Direct self-control (DSC) of inverter-fed induction machine;Depenbrock;IEEE Trans. Power Electron.,1988
3. Kang, J.-K., Chung, D.-W., and Sul, S.K. (1999, January 9–12). Direct torque control of induction machine with variable amplitude control of flux and torque hysteresis bands. Proceedings of the IEMDC’99—IEEE International Electric Machines and Drives Conference, Proceedings (Cat. No.99EX272), Seattle, WA, USA.
4. Swierczynski, D., and Kazmierkowski, M.P. (2002, January 5–8). Direct torque control of permanent magnet synchronous motor (PMSM) using space vector modulation (DTC-SVM)-simulation and experimental results. Proceedings of the IECON 02—IEEE 2002 28th Annual Conference of the Industrial Electronics Society, Seville, Spain.
5. Hiba, H., Ali, H., and Othmen, H. (2013, January 21–23). DTC-SVM control for three phase induction motors. Proceedings of the 2013 International Conference on Electrical Engineering and Software Applications, Hammamet, Tunisia.
Cited by
6 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献