Multi-View Graph Learning for Path-Level Aging-Aware Timing Prediction
-
Published:2024-09-02
Issue:17
Volume:13
Page:3479
-
ISSN:2079-9292
-
Container-title:Electronics
-
language:en
-
Short-container-title:Electronics
Author:
Bu Aiguo1, Li Xiang1, Li Zeyu1, Chen Yizhen1
Affiliation:
1. National ASIC System Engineering Research Center, School of Integrated Circuits, Southeast University, Nanjing 210023, China
Abstract
As CMOS technology continues to scale down, the aging effect—known as negative bias temperature instability (NBTI)—has become increasingly prominent, gradually emerging as a key factor affecting device reliability. Accurate aging-aware static timing analysis (STA) at the early design phase is critical for establishing appropriate timing margins to ensure circuit reliability throughout the chip lifecycle. However, traditional aging-aware timing analysis methods, typically based on Simulation Program with Integrated Circuit Emphasis (SPICE) simulations or aging-aware timing libraries, struggle to balance prediction accuracy with computational cost. In this paper, we propose a multi-view graph learning framework for path-level aging-aware timing prediction, which combines the strengths of the spatial–temporal Transformer network (STTN) and graph attention network (GAT) models to extract the aging timing features of paths from both timing-sensitive and workload-sensitive perspectives. Experimental results demonstrate that our proposed framework achieves an average MAPE score of 3.96% and reduces the average MAPE by 5.8 times compared to FFNN and 2.2 times compared to PNA, while maintaining acceptable increases in processing time.
Funder
National Key Research and Development Program of China National Natural Science Foundation of China Jiangsu Natural Science Foundation
Reference30 articles.
1. CMOS Reliability From Past to Future: A Survey of Requirements, Trends, and Prediction Methods;Hill;IEEE Trans. Device Mater. Relib.,2022 2. Kim, S., Park, H., Choi, E., Kim, Y.H., Kim, D., Shim, H., Chung, S., and Jung, P. (2023, January 26–30). Reliability Assessment of 3nm GAA Logic Technology Featuring Multi-Bridge-Channel FETs. Proceedings of the 2023 IEEE International Reliability Physics Symposium (IRPS), Monterey, CA, USA. 3. Yasuda-Masuoka, Y., Jeong, J., Son, K., Lee, S., Park, S., Lee, Y., Youn Kim, J., Lee, J., Cho, M., and Lee, S. (2021, January 11). High Performance 4nm FinFET Platform (4LPE) with Novel Advanced Transistor Level DTCO for Dual-CPP/HP-HD Standard Cells. Proceedings of the 2021 IEEE International Electron Devices Meeting (IEDM), San Francisco, CA, USA. 4. Mishra, S., Weckx, P., Zografos, O., Lin, J.Y., Spessot, A., and Catthoor, F. (2021, January 21–25). Overhead Reduction with Optimal Margining Using A Reliability Aware Design Paradigm. Proceedings of the 2021 IEEE International Reliability Physics Symposium (IRPS), Monterey, CA, USA. 5. Berkeley Reliability Tools-BERT;Tu;IEEE Trans. Comput.-Aided Des. Integr. Circuits Syst.,1993
|
|